Material Safety Data Sheet (MSDS)

Part I Chemical and Enterprise Identity

Chinese name of the Chemical: Shui Xing Lv Yan Liao

English name of the Chemical: Water based aluminum pigment 

Name of the enterprise: Suzhou Manterbo Nano Technology Co., Ltd.

Address: 18 Datong Rd, Huqiu District, Suzhou, Jiangsu, China

Zip code: 215000

Contact number: +86 18952420308

Email: wrc412@manterbo.com 

MSDS NO.: MTBSXLYJ001

Effective from: January 10, 2026

Part II Hazard Identification

Hazard category: Not classified as a hazardous material. 

GHS Classification 

Not a dangerous substance according to GHS. 

Physical and chemical hazard: There is no need to classify based on present information.

Hazards to health: There is no need to classify based on present information. 

Environmental hazard: There is no need to classify based on present information.

Explosion hazard: There is no need to classify based on present information.

GHS-Labelling 

Not a hazardous substance or mixture according to the Globally Harmonised System (GHS). 

Hazardous components which must be listed on the label 

Other hazards which do not result in classification

Combustible Solids, the substance will combust only when it is exposed to an open flame and is heated to its flash point temperature(70 ℃).

Part III Main Ingredients/Compositions Information

Name of the chemical:Water based pigment 

Ingredients of the chemical                             Percentage                    CAS NO.

Part IV First Aid Measures Inhalation:

Use appropriate respiratory protective equipment. 

Transfer the patient to a ventilated place.

Give first aid by artificial respiration if necessary.

Skin exposure: Rinse with plenty of water. Soap, liquid soap, etc. can be used.

Remove the contaminated clothing and clean thoroughly.

Eye exposure:

Rinse eyes with plenty of water until irritation disappears. 

If the irritation persists, seek medical treatment.

Ingestion by mistake:

Do not induce vomit if swallowed.

Keep a resting position and give medical care in time.

Part V Fire Fighting Measures

Hazardous characteristics: water based pigment is not a combustible substance in nature (flash point:70℃). 

Hazardous combustion products: carbon dioxide, aluminum oxide dust, etc.

Fire extinguishing agents used: dry powder fire extinguisher, or use cement, sand to extinguish fire. 

Fire- fighting precautions: Do not use water or foam fire extinguishing agent to prevent hydrogenation of water based pigment. 

Part VI: Accidental Emergency Treatment

Emergency treatment: Transfer the water based pigment falling to the ground with a shovel, spoon (made of materials such as wood, aluminum, copper, etc.) or other tools which will not generate sparks to a special container to avoid solvent evaporation of water based pigment.

Removal method: Wipe the floor with cleaning solution or soap. 

Part VII Operating Disposal and Storage

Adaptive temperature:

Storage temperature (℃): room temperature or lower 

Transport temperature (℃): room temperature or lower

Loading and unloading temperature (℃): room temperature or lower 

Applicable packaging materials: carbon steel, stainless steel and plastic. 

Not applicable packaging materials: natural rubber and butyl rubber.

General precautions for storage, handling and use:

Make sure the container is tightly closed and handle with care.

Open the cover slowly to control the release of pressure inside the container.

It shall be stored in a cool and well-ventilated place, and kept away from incompatible materials. 

Do not store or use it near an open flame, heat source or ignition source. Avoid direct exposure to sunlight.

Do not pressurize, heat, cut or weld the container.

Additional warning: Empty packing containers should be properly handled since they are hazardous as well.

Part VIII. Exposure control/individual protection

Mechanical control measures/ventilation: 

Mechanical ventilation is recommended whenever the product is used in confined spaces or conditions above room temperature, or at least in a place with good natural ventilation. Maximum allowable concentration: 1200 mg∕m3 (165 ppm) (refers to the solvent contained in the material)

Individual protection:

General recommendation: Personal protective equipment should be selected according to the degree of hazard, workplace and use method of the product. Generally speaking, we recommend to use protective goggles with protective edges and overalls that protect the arms, legs and body. In addition, anyone who enters the range of use of this product should wear protective glasses with protective edges.

Special recommendation: Based on and limited to our experience in this product, it is suggested that satisfactory protective measures can be provided to industrial users.

Respiratory protection: When the concentration in the air exceeds the concentration limits given in this section, it is recommended to use a half-masked filtered gas mask to prevent inhalation of excessive hazardous substances. Suitable filter materials depend on the type and amount of chemicals used in the workplace.

However, the Class A filter material category "A” or similar materials can be considered for use.

Hand protection: When handling this product, it is recommended to wear chemical resistant gloves. Suitable protective gloves depend on the working environment and the chemicals being processed. We are quite experienced in using protective gloves when produce nitrile polymers. If the protective gloves begin to rot, they should be replaced immediately.

Eye protection: See general recommendation. 

Skin/body protection: See general recommendation.

Part IX. Physical and Chemical Properties

Physical state: Paste solids 

Color: Silver white

Odor: Alcohol odor 

PH value: 7.5-9.0

Melting point (℃): 660℃ (refers to the solids in the substance)

Boiling point (℃): 2056℃ (refers to the solids in the substance) 

Boiling point (℃): 100℃ (refers to the solvent in the substance) 

Relative density (Water = 1): 0.96g ∕ cm3

Saturated vapor pressure: 0.61129kpa (refers to the solvent in the substance)

Flash point: N/A

Heat of combustion (KJ/mol):

Critical pressure (MPa): N/A

Critical temperature: N/A

Natural temperature: None (referring to the solvent in this substance) 

Explosion limit (in air): None 

Deliquescent: None 

Main use: Silver metallic pigment 

Other physical and chemical properties: Primarily used as a silver and metallic sparkle effect pigment, with good heat and radiation resistance.

Part X Stability and Reactivity

Stability: Stability Conditions to avoid instability: Not applicable

Materials and environmental conditions (incompatibility) must be avoided: strong oxidizing agents, acids and bases

Is there any hazardous polymerization: no

Part XI. Toxicological Data

Inhalation hazard: There is no need to classify based on present information..

Skin exposure: There is no need to classify based on present information.

Harm of accidental ingestion: There is no need to classify based on present information.

Genital cell mutagenicity: There is no need to classify based on present information.

Carcinogenicity: There is no need to classify based on present information.

If you have any special requirements, please inquire again for more information.

Part XII. Ecological Data Environmental mobility

The solvent in this substance degrades rapidly in air.

The solvent in the substance is rapidly biodegraded and is an easily degradable substance. The solvent in the substance can be removed by a wastewater treatment facility.

The solids in the substance are not easily degradable. Ecotoxicity and bioaccumulation:

Even if the substance is dissolved in water to the utmost extent, it is not expected to cause acute toxicity or long-term negative impacts to aquatic organisms.

Part XIII. Disposal Considerations

The following shall apply only to the product provided. If the product is mixed with other substances, other disposal methods shall be followed. If you have any question, please contact us or local authorities.

Empty drums should be recycled, reproduced or disposed of by a qualified or licensed agency. Handle of with care in any case to ensure compliance with national and local regulations.

This product is neither suitable for disposal by deep burial nor being discarded into public sewers, drainage systems, or natural rivers.

This product is not suitable for disposal in government waste disposal systems.

The product can be burned directly in appropriate equipment, with little ash produced.

The waste of this product should not be in contact with acid-base substances to avoid chemical reactions.

Part XIV. Transport Information 

Dangerous goods code: Non-dangerous goods 

UN Number: None

Packaging mark: None 

Packaging category: None

Packing method: plastic drum lined with plastic bag.

Transportation precautions: Handle with care and prevent violent collision to avoid damage to the packaging barrel and product falling. Please refer to the regulations of the local transportation department for specific transportation materials.

Part XV: Regulatory Information

Regulatory information: "Regulations on the Safety Administration of Hazardous Chemicals" (Decree No. 344 of the State Council)、 "Measures for the Administration of Hazardous Chemicals Registration" (Decree No. 35 of the State Economic and Trade Commission)、 GB/T 16483-2008、 GB/T 17519-2013、 GB 30000 series GHS classification standards、 "Production Safety Law of the People's Republic of China"、 "Environmental Protection Law" and other relevant regulations.

Part XVI: Other Information

This MSDS data is based on existing information and is provided for safe use reference only. 

It will be revised promptly in case of product updates or regulatory changes. 

Disclaimer: Confirm applicability before use, and assume responsibility for any improper use

Revised by: Technical Department of the Company

Date of revision: January 10, 2026

Revision description: With the increase of experience and knowledge, we will periodically amend the MSDS. This MSDS is the latest version.

Other information: This information applies to all models of water-based pigments of our company and may not be applicable to the mixing or use of this substance with other substances.

This information represents all knowledge and belief in the accuracy and reliability of water-based pigments by Suzhou Manterbo Nano Technology Co., Ltd. prior to the date shown.